Sophos Wireless Update 2.1.3 (Staged release)
Overview
The v2.1.3-2 release brings a number of bug fixes which help to deliver an overall better Wi-Fi experience.
Bug Fixes
| Issue Key | Summary |
| CWIFI-10091 | Few client disconnections are observed when Rogue AP is enabled |
| CWIFI-10655 | Auth DOS Attack: Kernel crash observed on APX320 |
| CWIFI-10522 | Legacy AP models AP100/55 does not support more than 120 clients per radio |
| CWIFI-9412 | CVE-2018-14526: Unauthenticated EAPOL-Key decryption in wpa_supplicant |
| CWIFI-10193 | AP does not allows the user to connect again after mac filter update |
| CWIFI-10605 | Mesh: AP TX/RX Workload (zero) and Memory (51%) for MESH AP |
| CWIFI-10565 | Legacy AP100/55 crashes and reboots when 124 or more clients connected on 2.4Ghz radio |
| CWIFI-10559 | AP Channel list: Country specific channels are not getting updated on Cloud UI after ‘sites’ change |
| CWIFI-9403 | CVE-2018-0732 – Openssl “denial of service during forward secrecy setup |
| CWIFI-10153 | Captive portal: user can’t enable client isolation for Captive portal based SSID profile |
| CWIFI-9440 | 5GHz SSID not broadcasting in APX320 when mesh in enabled |
| CWIFI-10189 | Channel change events are seen for the AP where channel is manually configured. |
| CWIFI-10329 | APX 320 (ROW): Cloud UI shows channel 36 for Indonesia ( 5.150-5.725 disabled ) & Ch width 40MHz |
| CWIFI-10191 | APs are going down/inactive due to kernel panic |
| CWIFI-10525 | SSID with (Captive portal + dynamic vlan) Configuration Should Not be Allowed |
| CWIFI-10232 | Slider control for scheduling settings for network availability is not working when it’s start or end point set to 11 PM |
Known Issues
| Issue Key | Summary |
| CWIFI-10343 | Intel-8265 chipset (Window 2010) clients are not getting associated when Fast roaming is enabled. |
Note : Disable Fast roaming under SSID config if Intel-8265 chipset clients are present in the network.
